TS165-2湿地推土机
TS165-2推土机性能简介
TS165-2 Bulldozer
TS165-2推土机系半刚性悬挂、机械传动、液压操纵、低比压履带推土机。该机性能优良，操作灵活方便，质量可靠，工作效率高，特别适合沼泽地和含水量比较高的松软地带使用。
TS165-2 bulldozer is semi-rigid suspended, mechanism transmitted, hydraulically controlled and track-type. It features reliable quality and better efficiency for easy operation. It is applicable particular in soft or sloppy working conditions.
主机性能参数(标准型：直倾铲)
Main specifications (Standard type: straight dozer)
外形尺寸(长×宽×高) 5585×4222×3190 mm (含履刺)
使用质量 18.3 t
飞轮功率 121 kW
最大牵引力 143.4 kN
(有效牵引力取决于机重和地面附着性能)
接地压力（使用重量） 28.3 KPa
最小转弯半径 4.0 m
最小离地间隙 352.5 mm
坡行角度 纵向 30度 横向 25度
Overall dimensions (L×W×H) : 5585×4222×3190 mm
Operation weight: 18.3 t
Flywheel power: 121 kW
Max. drawbar pull: 143.4 kN
(The efficient force depends on weight and ground surface adherence)
Ground pressure (at operating weight): 28.3 KPa
Min. ground radium: 4.0 m
Min. ground clearance: 352.5 mm
Grade ability: Straight 30° Side 25°
柴油机
Diesel engine
制造厂家 潍坊柴油机股份有限公司
型号 WD615T1-3B
形式 直列、水冷、四冲程、增压、直喷
缸数--缸径X行程 6-126×130mm
总排量 9.726 L
标定功率 130 kW
额定转速 1800 r/min
油耗(标定功率)
燃油消耗量 ≤225 g/kW.h
机油消耗量 ≤1.8 g/kW.h
最大扭矩 870N.m/1200-1300rpm
冷却方式 闭式循环水冷却
启动方式 24V电启动
许用海拔 ≤4000m
Manufactured factory: WEIFANG DIESEL ENGINE CO., LTD
Model: WD615T1-3B
Type: straight line, water-cooled, with four stroke, pressure boost and direct injection
Number of cylinders-bore×stroke: 6-126×130mm
Total piston displacement: 9.726L
Rated RPM: 1800r/min
Rated power: 130kW
Oil consumption (at rated power output)
Fuel consumption: ≤225g/kW.h
Lube oil consumption: ≤1.8g/kW.h
Max. torque (≤1260r/min): 870N.m（1200-1300rpm）
Cooling method: closed circulation water cooling
Starting method: by electric at 24V
Admissible altidude ≤4000m
柴油机
制造厂家 上海柴油机股份有限公司
型号 G128ZG8
形式 直列、水冷、四冲程、增压直喷
缸数--缸径×行程 6-135×150mm
总排量 12.88 L
额定转速 1800 r/min
标定功率 130 kW
燃油消耗率（标定功率） 224 g/kW.h
机油消耗量 0.7 g/kW.h
最大扭矩/转速 838 N.m/1260 rpm
冷却方式 闭式循环水冷却
启动方式 24V电启动
空气滤清器： 卧式两级滤清
许用海拔 ≤4000m
Manufactured factory: SHANGHAI DIESEL ENGINE CO., LTD
Model: G128ZG8
Type: straight line, water-cooled, with four stroke, pressure boost and direct injection
Number of cylinders-bore×stroke: 6-135x150mm
Total piston displacement: 12.88L
Rated RPM: 1800r/min
Rated power: 130kW
Oil consumption (at rated power output)
Rated oil consumption 224g/kw.h
Lube oil consumption: 0.7g/kW.h
Max. torque: 838N.m/1260rpm
Cooling method: closed circuit water cooling
Starting method: by electric at 24V
Air filter: horizon, double filter
主离合器与变速箱
Main clutch and transmission
主离合器为常开式、多片湿式粉末冶金摩擦片，液压助力操纵，变速箱采用常啮合斜齿轮传动，结合套换挡，双杆机械操纵，前进五挡，后退四挡。
行驶速度：（柴油机1800rpm时理论速度）
前进：一挡 2.702km/h 后退：一挡 3.778km/h
二挡 3.558km/h 二挡 4.974km/h
三挡 6.087km/h 三挡 8.511km/h
四挡 8.076km/h 四挡 11.281km/h
五挡 11.261km/h
The flywheel clutch: is constantly disengaged with multi-metal discs, which is operated by hydraulically boosting.
The transmission is mechanical double levers controlled with constantly meshed helical gears and coupling sleeve shift. It has five speeds forward and four speeds reverse :
.Travel speed (as per diesel engine 1800r/min theoretical speed)
Forward Backward
First speed 2.702km/h First speed 3.778km/h
Second speed 3.558km/h Second speed 4.974km/h
Third speed 6.08km/h Third speed 8.5114km/h
Forth speed 8.07km/h Forth speed 11.281km/h
Fifth speed 11.261km/h
转向与制动
Steering and braking
转向离合器为湿式、多片、粉末冶金摩擦片、弹簧压紧、液压分离。
制动器为湿式、浮动、双向带式、脚踏式机械操纵，液压助力，可实现转向与制动联动
The steering clutch is tighten by pressured springs and separated hydraulically with oil-type, multi-powder-metal discs.
The brakes are oil, two-direction floating band with mechanism foot pedals, hydraulic boosted. The steering and braking can be actuated in one control.
最终传动
Final drive
两级直齿轮减速，浮动油封密封，链轮采用组合式，便于维修。
The final drives are double reduction with spur gear and segment sprocket, which are sealed by floating oil seal for easy service.
行走系统
Undercarriage system
行走架为槽钢钢板焊接矩形截面，八字梁型式。支重轮、托链轮、引导轮均装有密封性能好、寿命长的浮动油封。
单侧支重轮数量 单边4个，双边3个
单侧托链轮数量 2个
单侧引导轮数量 1个
履带型式 三角截面、宽幅、组合式。
履带涨紧型式 液压涨紧
节距 203 mm
单侧履带板数量 43块
履带板宽度 1070mm
履带接地长度 3020mm
密封和润滑履带 （可选购件）
该履带的节距、履带板数量、履带板宽度与普通履带相同。
The undercarriage is section steel welded track roller frame with diagonal
brace.
The track rollers, carrier rollers and front idlers have the same floating seals which are long-service life and seal well.
Number of track rollers: 4 single-flange on each side
3 double-flange on each side
Number of carrier roller : 2 on each side
Number of front idler: one on each side
Track type: triangle section, modular type.
Track adjuster type: by hydraulically adjust
Pitch: 203 mm
Numbers of shoe: 43
Width of shoe: 1070mm
Length of track on ground: 3020mm
Sealed and lubricated track (0ptional parts)
The pitch, number of shoes, width of shoe are the same with ordinary track
工作装置液压系统
Implement hydraulic system
由双联齿轮油泵、先导阀、主阀组及油缸、滤油器和管路组成
油泵型式 双联齿轮油泵
油泵流量 前泵190 L/min 先导泵 19 L/min
系统压力 12 MPa
It consists of two group gear pump ,pilot valve, main valve , cylinders, oil filter and lines.
Pump type: two group gear oil pump
Pump flow :
Front pump : 190L/min Pilot pump :19L/min
System pressure: 12MPa
驾驶室
Cab
噪音低、视野宽阔、可调式的司机座椅，并配备电风扇。
备有以下驾驶室供用户选用
1. 带空调器的驾驶室。
2. 翻车保护司机凉棚。
3. 防翻架。
The cab with adjustable seat features low noise and wide visible range and contains electrical fan.
The different kinds of cabs as follow can be chosen:
1. Cab with air-conditioner
2. Cab with Rops canopy
3. Rops.
加注容量
Service refill
加注部位 容量（L）
水箱及柴油机冷却水 60
柴油机润滑系统用油 20(WD615)
25(G128ZG8)
分动箱、主离合器用油 35
变速箱、后桥传动用油 95
最终传动用油（单侧） 24
工作装置液压系统用油 80
柴油箱装柴油 285
支重轮、托链轮、引导轮用油（每个） 0.35
Fill location Capacity(L)
Radiator and diesel engine water: 60
Lubricating system of diesel engine Oil: 20(WD615)
25(G128ZG8)
Flywheel house, main clutch , oil: 35
Transmission, bevel gear case Oil: 95
Final drive(each side) Oil: 24
Implement hydraulic system Oil: 80
Fuel tank Oil: 285
Track roller, carrier roller, front idler(each) Oil: 0.35
推土铲主要参数
Blade specifications
铲刀型式 （Blade） 直倾铲(Straight)
铲刀宽度（Width） 4222 mm
铲刀高度（Height） 1035 mm
最大切土深度（Max digging depth）: 400mm
最大提铲高度（Max. ground clearance）: 957mm
垂直倾斜角Tilting angle: 8.5°
铲刀容量（Blade capacity）: 4.5m3
松土器主要参数：
Ripper specifications
松土齿数： 3个
长 ： 1580mm
宽： 2020mm
高： 1236mm
最大松土深度： 550mm
最大提升高度： 510mm
Number of shank : three
Length : 1580mm
Width : 2020mm
Max. Penetration depth : 550mm
Max. Lifting height : 510mm
